Welcome to the Jordan Acoustics product portfolio.
Here you will find some of the finest audio products currently available. All of our products have been specifically chosen to represent the pinnacle of performance and design from our supporting manufacturers. With new and exciting products being added on a regular basis please be sure to visit this page regularly.
 |
 |
 |
 |
 |
 |
|||||||
 |
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
McIntosh: MC2301 Monoblocks |
|||
|
|
|
|
Specifications |
|||
The new McIntosh MC2301 monoblock tube amplifier hails the fusion of our Unity Coupled and Quad-Differential circuit topologies. The Mcintosh Unity Coupled Circuit stands as one of the premiere tube topologies ever conceived, making possible revolutionary power bandwidth and low distortion. Quad-Differential circuitry, a recent McIntosh innovation, cancels nearly all induced noise and circuit-borne nonlinearities resulting in the lowest noise levels ever achieved in a tube amplifier. With 300 Watts available at 8, 4 or 2 ohms, the MC2301 provides power enough to drive even the most difficult loudspeakers. From the demands of massed chorale to full-on rock and roll, the MC2301 delivers the most extraordinarily lifelike and dynamic performance ever heard from a McIntosh tube amplifier.
300 watts into an 8, 4 or 2 ohm load is the minimum sine wave continuous average power output.
OUTPUT LOAD IMPEDANCE:
Terminals for 8, 4 and 2 ohms
RATED POWER BAND:
20Hz to 20kHz
TOTAL HARMONIC DISTORTION:
0.5% maximum harmonic distortion at any level from 250 milliwatts to rated power output.
+0, -0.5dB from 20Hz to 20kHz
+0, -3.0dB from 10Hz to 100kHz INPUT SENSITIVITY
1.7V Unbalanced
3.4V Balanced
A-WEIGHTED SIGNAL-TO-NOISE RATIO
117 below rated output
INTERMODULATION DISTORTION
0.5% maximum if instantaneous peak power output does not exceed twice the rated output, for any combination of frequencies from 10Hz to 20kHz
WIDE BAND DAMPING FACTOR:
Greater than 15
INPUT IMPEDANCE:
47,000 ohms
TUBE COMPLIMENT :
2 - 12AT7 Voltage Amplifiers; 8 - KT88 or 6550 Output Tube
POWER REQUIREMENT
100 volts, 50/60Hz, 6.6 amps
110 volts, 50/60Hz, 6 amps
120 volts, 50/60Hz, 5.5 amps
220 volts, 50/60Hz, 3 amps
230 volts, 50/60Hz, 2.75 amps
240 volts, 50/60Hz, 2.75 amps
Standby 1W
DIMENSIONS (H x W x D including front panel and cables) 12-5/16” (31.3cm) x 17-3/4” (45.1cm) x 23” (58.4cm)
WEIGHT
116 pounds (52.6kg) net: 141 pounds (64kg) in shipping carton
FREQUENCY RESPONSE
POWER OUTPUT
|
|||
|
|||
|
|||
Price
£23990
0% Finance Example
Call for Details
Contact Us
To enquire about this product,
please click here