Isotek: Vision

Specifications

Overview

The GII Mini Sub & Vision have been universally accepted as the best component from component isolating mains power distributor at their price point. It was designed to be a very rewarding single box ‘plug-n-play’ solution for a complete audio or home theatre system. The GII Mini Sub & Vision offer astounding value for money and gives a taste of what IsoTek's truly high-end solutions offer. Within their product range the GII Mini Sub & Vision sit between the Solus and isolation transformer based SubStation.

At the rear of the unit you will note six high quality outlets, these are individually filtered to stop components ‘talking’ to each other or corrupting the clean supply provided by the unit. This is achieved by a series of delta filters on the outputs and a sophisticated filter circuit, which was inspired by work in cryogenics, and harnesses the technique used for the switching of cryogenic coils. Both products feature our new ‘Polaris-X’ technology that draws mains contaminants away from audio components plugged into the unit.

Outputs 1 & 2 have been given a higher power rating and should be used for high current devices, for example power amplifiers, integrated amplifiers, some ‘tube’ pre-amplifiers, projectors and plasma screens etc. The remaining four are suitable for all other equipment, for example CD players, turntables etc…
GII Mini Sub & Vision features enhanced protection through stabilising the units voltage and giving it a very large absorption ability, this is extremely important in today’s society where dangerous power surges can damage sensitive audio equipment.

All fusing is external, this eliminates any need to enter the product. The unit is so safe that even if the mains are wired incorrectly in the rest of the house or environment that the product is used, the unit will correct the problem sonically.

All components are of the highest grade and are under stressed, this gives greater longevity. These are hand soldered onto a PCB with silver solder, the large PCB also features a ground plane upper surface acting as a very high grade common mode filter across the whole board, this allows the unit to act as a true faraday cage, protecting itself from RFI and other components from the job it performs.

Placement

Ideally the unit should be placed upon its own dedicated shelf of an audio grade equipment rack. If this is not possible the unit may be placed on top of or under other pieces of equipment to a maximum weight limit of 20kg. Due to the products careful screening by way of a large ground plan within the unit, no adverse effects should be caused by this placement. If you have to locate the unit on the floor or in any other location please refer to the safety section of the manual.

System integration

IsoTek strongly recommend that a good quality mains cable is used and this cable is consistent throughout your system. Look for a cable with good conductors, for example oxygen free copper, this cable should also have a high degree of shielding from RFI.

Specifications

The following information relates only to the IsoTek Mini Sub GII and Vision. These are original products and should not be confused with previous or ‘copy cat’ models.

© Jordan Acoustics | All rights reserved | Telephone: 0800 121 4771 or 0800 121 4772 | Contact Jordan Acoustics | Subscribe to our Newsletter